Suunto MCB Bedienungsanleitung PDF herunterladen (Seite 6)

8. Signal with a mirror

A mirror enables signaling over long distances by

flashing sunlight reflected in the mirror.

1. Hold two fingers in a V-shape at arm’s length so that

you see the target between your fingers.

2. Keep the open compass mirror upright close to your

eyes and turn the mirror until the reflected sunlight

hits your fingers.

3. Rotate the mirror left-to-right to create a flashing

signal in the desired direction.

9. Measure slope incline

Applies to MC-2 and MC-2 Global only.

The scale for declination correction on the back of the

capsule also functions as a scale for the clinometer.

1. Turn the capsule so that the bearing index is at 270°

(due West) and tilt compass on its side with the

declination scale downwards.

2. If you have a clear view across the slope, align the

compass to the slope with the back of the compass is

facing you.

3. OR, if you have a clear view up or down the slope,

sight the top or the bottom.

4. Read from the clinometer needle to get

approximate inclination reading.

X °

1 2 3 4 5 6 7 8

Keine Kommentare

Suunto MCB Bedienungsanleitung Seite 6