Suunto Cobra Bedienungsanleitung PDF herunterladen (Seite 14)

2.3. PUSH BUTTONS

The dive computer has easy-to-use push buttons and an advisory display, which

guides the user. The SMART (MODE) button is the key to the system. The two

scroll buttons, PLAN and TIME, are used for scrolling up and down the menus

and to show the alternative displays. The dive computer is controlled with these

three push buttons as follows (see Fig. 2.2.).

Press the SMART (MODE) button

• To activate the dive computer.

• To change from the Surface Mode to the menu based modes.

• To select, conﬁ rm or quit a submode (short press).

• To immediately exit any submode to the Surface Mode (long press).

• To activate the electroluminescent backlight (in the Surface Mode hold

down the mode button for more than two (2) seconds, during a dive for

one (1) second).

Press the arrow up scroll (PLAN) button

• To activate the timekeeping display, if the display is blank.

• To activate the Dive Planning in the Surface Mode.

• To make a special bookmark in the proﬁ le memory during a dive.

• To scroll up the options (s, increase).

Press the arrow down scroll (TIME) button

• To activate the timekeeping display, if the display is blank.

• To activate the Time display(s) and/or alternative display(s).

• To scroll down the options (t, decrease).

The dive computer is controlled with the SMART (MODE/On/Backlight/Select/

OK/Quit) and the PLAN s and TIME t push buttons and with the water contacts

as follows:

Activation press the SMART (On) button or immerse the instrument in

water for ﬁ ve (5) seconds.

Dive Planning in the Surface Mode, press the PLAN button.

Menu Modes press the SMART (MODE) button.

The display is illuminated by holding down the SMART button for more than

two seconds.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 77 78

Keine Kommentare

Suunto Cobra Bedienungsanleitung Seite 14