Suunto Vyper Bedienungsanleitung PDF herunterladen (Seite 60)

5.3. MAINTENANCE

The instrument should be soaked, thoroughly rinsed with fresh water, then dried

with a soft towel after each dive. Make sure that all salt crystals and sand particles

have been ﬂ ushed out.

Check the display and the transparent battery compartment cover for possible

moisture or water. DO NOT use the dive computer, if you detect any moisture

or water inside.

CAUTION!

· Do not use compressed air to blow water off the unit.

· Do not use solvents or other cleaning ﬂ uids that might cause damage.

· Do not test or use the dive computer in pressurized air.

5.4. WATER RESISTANCE INSPECTION

Water resistance of the unit must be checked after replacement of the battery or af-

ter other service operations. The check requires special equipment and training.

You must frequently check the transparent battery compartment cover and the

display for any sign of leaks. If you ﬁ nd moisture inside your dive computer,

there is a leak. A leak must be corrected without delay, as moisture will seriously

damage the unit, even beyond repair. SUUNTO does not take any responsibility

for damage caused by moisture in the dive computer, if the instructions of this

manual are not carefully followed.

In case of a leak, immediately take the dive computer to an authorized SUUNTO

dealer or distributor.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 85 86

Keine Kommentare

Suunto Vyper Bedienungsanleitung Seite 60